Anchor Locker Washdown System

Anchor Locker Washdown System Dave Peffer 5/1/1998 Hull #: 20 Dave Peffer, Hull #20, ‘Spindrift’ has installed a SHURflo Blaster washdown system to clean the chain and anchor as they come aboard. The pump fit on the forward bulkhead under the v-berth sink, taking water from the sink drain. The sink drain plug fits tight, and prevents sucking air when the system is activated. Be sure to replace the drain tubing with non-collapsing hose, which must also be used for the run from the tee to the pump. Double clamp all hose connections. Dave opted not to put a filter in line before the pump to keep pressure high, but will add one if the pump clogs. The hose and electric wire go up through the hole in the cabinet above the sink (used for the amidships water tank fill and vent) with a little extra reaming, then forward in

You need to be logged in to see the rest of this content.  Catalina380-IA members, please login.

To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.