Access under the Anchor Locker

The attached picture shows one way to access the anchor well hose. I didn’t actually replace the hose because when I got in there I could tell that it wasn’t the culprit. I had the Admiral run the hose in the well while I felt for leaks at both ends of the hose. I don’t think the hose is reachable without an access hole. I could have replaced the hose through this access hole. The hole looks kind of raw in this picture but I finished it by putting a six inch deck plate in it and covering it with the teak plywood panel. Paul McManus Sea Sea Rider C380 #185

You need to be logged in to see the rest of this content.  Catalina380-IA members, please login.

To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.