Winch Rite — Review

Posted by: “Joseph A. Revak, DMD, MAS” joenopain1 Thu Aug 11, 2011 5:01 am (PDT) I do have the Winch Rite. I only use it for raising the main. It would be to bulky for jib sheeting. I like it for the main. I also have the Tides Marine Strong track system. When I first got the Winch Rite I used the slow speed to raise the Main, now I use the higher speed and it does just fine. A LOT less work for my back. It is usually Diane and I on the boat so, as someone said with the Strong system I could raise the main at the mast easily, but we always raise the Main from the cockpit and there is the additional resistance from the blocks. Where I really like it is at the beginning of the season while I feed the jib into the

You need to be logged in to see the rest of this content.  Catalina380-IA members, please login.

To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.

Affordable Cordless Drill as Winch Driver – Mainsheet February 2005

Affordable Cordless Drill as Winch Driver Roger Cheney 2/1/2005 Hull #: 132 Faithful readers of this column [others are to be pitied!] may recall an earlier brief article [May ’03] in which Wallace Shakun [Morning Star, C380 #12] proposed using a heavy-duty cordless drill to drive winches. He put the idea into practice using a straight-drive 1/2″ Bosch drill together with an adapter “bit”, which he developed, that mates a standard 1/2″ chuck with our winch drive socket. The idea sounded good to me, except that I felt a right-angle drill would provide an easier way to resist the high torques developed [about 500 inch-pounds]. Wallace indicated that the straight-drive version worked well, but that he was also considering the right-angle approach. Milwaukee now has a hefty right-angle drill, which develops a “bit” more torque, and which costs somewhat more [$300 vs $200]. Roger Cheney [C380 #132, “2nd Wind”] has

You need to be logged in to see the rest of this content.  Catalina380-IA members, please login.

To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.