Aft Cabin Mirror Bob Bierly 11/21/2001 Hull #: 255 I removed and reinstalled the aft cabin mirror on a cleat mounted on the underside of the steps and through the head wall. I now store screens, trays, between the back of the mirror and the bulkhead. I cut a 10” inspection port into the seat on the port side of the bed. The storage area inside is amazing. I installed a board between the storage area and the manufacturer-installed drawers at the foot of the bed to keep errant stored items from finding their way into the vicinity of the prop shaft coupling and stuffing box. That was the only thing I had to do to make this a very sizable long-term storage area. The side toward the fridge port side is left open. The storage is formed between the bulkhead, the head wall on the starboard end and the
Anchor Locker Ideas Sid Sytsma 11/1/2001 Hull #: 242 I have added the following items to the anchor locker: (1) A West Marine (SJPRO#960012 @ $26.95) line holder. I have also mounted one in the port lazarette holes line up exactly with ones in place for the seat latch no drilling. (2) I have mounted a reel of Ankoralina line for deploying a lunch hook. Very handy and does not take much space. The reel has about 185 of polyester strap that has approximately the same strength and stretch as ½ nylon three-strand line. The Ankoralina does dual duty as a jackline. I have mounted a 25# Danforth High Tensile on a piece of teak using the bracket that is typically used to hang a Danforth style anchor on a stanchion (West Marine #488353 @ $34.99). At the bottom of the teak board (that runs the full depth of the
Flatware and Utensil Storage Bob Bierly 11/1/2001 Hull #: 255 Flatware storage: I bought a standard wooden flatware storage box from a popular regional kitchenware store; I mounted it with hinges under the hanging shelf, with the hinges toward the settee and the opening toward the galley. I use a bayonet catch to hold the box up against the bottom of the shelf when its closed and use a short length of lifeline cable to hold the box when open at about thirty degrees. This gives my wife an accessible flatware storage, which seems to have been omitted in this Catalina. My wife misses the drawers from the Catalina 34 galley. Utensil storage: Many chefs like to store cooking utensils in a crock or like item immediately adjacent to the stove. I mounted an open topped wooden box about 3x3x5” box in the open space behind the stove to serve
Forespar Seacocks Warren Elliott 8/1/2001 Hull #: 44 Our 380-390’s come with eight seacocks [aka: thru-hulls]; these are, of course, critical to the operation and safety of our boats. Mishandling or severe damage to any thru-hull could allow flooding which our bilge pump may not be able to handle – not a happy situation! While we could add more pump capacity [see Scott’s write-up in the previous issue], “an ounce of prevention….”. So this is an important topic; it is also very relevant, as at least two captains have had a “problem”, me being one of them! But I’ll get into that later. The Forespar seacocks are made of Marelon, a particularly tough plastic which, in normal use, will probably outlast much of our equipment. Many of you are probably aware of the controversy over seacock material: bronze vs. plastic. I’m sure this discussion will go on well past my
Lazarette Removable Box Sid Sytsma 11/20/2001 Hull #: 242 I simply placed a plastic storage box (milk carton with relatively few holes) and hang it from the edges of the lazarette using four antenna holders (West SFANT#4142SS @$7.99). The hooks are bolted to the milk carton. I had to cut and bend the back ones to support the back end. This works best in the starboard lazarette due to the presence of the bilge pump in the port lazarette. We use the removable box for our inflatable life vests, safety harnesses, emergency horn, spotlight, etc.
Main Cabin Bilge Storage Bob Bierly 11/21/2001 Hull #: 255 Most folks have discovered the storage in the closed bilge’s just forward of the mast. Although some water could find its way into that space, it can easily be used for storage of canned goods, beer, wine etc. as it is. The other two bilge compartments can also be used for this kind of storage by placing a set of floorboards in each. [Older hull #’s have only two accessible bilge compartments-Ed]. The existing grid, which strengthens the boat, makes it possible to cut three boards each 6 ¾ by 16 ½ for the aft compartment, which will rest on the turn of the bilge and be held in place by the grid and each other. The storage area, which results, is above the float switch and yields an area 21” by 16″ by 15” high. The larger bilge compartment
Main Cabin Shelves and Storage Bob Bierly 11/21/2001 Hull #: 255 Recently, I built shelves at the navigation station to store my laptop computer, my inkjet printer, a 13” TV, a CD player and some incidental storage for CD’s etc. All of this is in the open space between the built in “radio” cabinet and the bulkhead forming the forward side of the nav station desk. The entire shelf system, really three interconnected shelves, rest on cleats screwed to the two bulkheads forming the space. By placing fiddles across the front edges of the shelves, the contents are secure in a seaway. It is amazing how much room there is in this area. BTW I also solved the problem several folks have reported of how to get the cover off the factory-installed radio space. I merely cut it in two pieces horizontally and covered the cut with a wood strip.
Shower Shelves Bob Bierly 11/21/2001 Hull #: 255 Within the shower there is a hanging locker, ostensibly for hanging slickers and such. We concluded we needed a linen closet a lot more than a place to allow slickers to get moldy (no air circulation in that locker.) Consequently, I built two shelves into that locker giving us three levels of storage for towels, linens etc. The shelves are secured to cleats on each end and have finished wooden fiddles along the edge at the opening. Really gives us some storage space.
Storage Ideas Harvey Berman 11/1/2001 Hull #: 201 The following is from Harvey Berman, who has sailed his C380, ”Soultice” from Canada to Central America. Dear Warren: I have been intending to submit some modifications for some time but never had a proper camera or was in a location that was convenient. I am submitting these at this time, without photos as you have encouraged. Photos can be supplied at a later date if required. We own hull # 201. Our 380 was delivered to Swan’s Marina, Ontario, Canada in July of 1999. We immediately commissioned her and headed south for a two-year cruise, which included Central America. We had to have more convenient storage space. There is a lot of room on the 380 but not all usable. “Soultice” is presently on the hard near Tampa, Florida. I am going by memory, but can supply more detail this winter
TV & Book Storage Ed and Sharyn Dahn 2/21/2001 Hull #: 111 One open project before our first cruise was to work out storage above the nav station for both the TV, video player, and books. This did not get done, and in the excitement of sailing for the first time the TV hit the deck. I am embarrassed to report that this happened not once, but three times. I must say that GE makes an extremely rugged TV, it still works perfectly, however, the cabin sole received a few nasty gouges. A book/TV retainer was made with the 1 ½ inch oak ½ round as shown below. Everything behind the retainer is secure and can be removed by lifting the item up and over the top.