Waste System Mods
Mike Kenny/Bob Goldman/Steve Krazinski
Hull #: C380 # 77/243/102
Following are probably the best methods towards eliminating unpleasant head odors from our C380-390’s. [Note that C387’s have a completely different waste system, one that uses only the new “odor-safe” hose, so most of the following does not apply.]
The basic approach here is to eliminate the older black hose and install rigid PVC piping wherever waste is continually present and doing so is practical. PVC is considered non-permeable so, properly installed, there should be zero odor from it. Alternatively, where not practical, installation of the relatively new “odor-safe” or “noodor” hose is the approach of choice. With regard to the tank egress plumbing, the only part which is continually in contact with waste is the main tank-output line, so this is the primary candidate for upgrading to PVC. Replacing other hoses with PVC or with
You need to be logged in to see the rest of this content. Catalina380-IA members, please login.
To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.