Spare Propane Locker Becomes Cockpit Cooler
Hull #: 20
We rarely need two propane bottles aboard, and we don’t want to open our refrigerator more often than absolutely necessary. My solution was to line the outside of the spare (starboard) propane locker with insulation, working from below in the lazarette. I used three wraps of roll insulation (from a home store) which sandwiches bubble-wrap between layers of foil, lightly gluing it and wrapping it in place with nylon strapping. The bottom was covered with expanded foam insulation board, and the joints sealed withlatex expanding foam insulation (Find this stuff! It cleans up with water!).
The locker cover was lined with the same rigid board insulation. Here I cut one piece to fit inside the water-exclusion fiddle, another to extend down just into the round part of the locker, using contact cement to hold them in place on