GPS Cockpit Power
Hull #: 20
Having the GPS mounted on the pedestal is convenient, especially if you have a 12V outlet to power it so you can keep the light on at night. There is not an outlet provided, so I added one. Using a Marinco 12VRC outlet with a rubber cover and a good seal, I placed it on the lower port quadrant on the side of the engine instrument pod, where it would be angled downward to prevent water running down into the barrel of the outlet or around the edge, should the seal fail. Be sure to check for interference with instruments inside the pod before drilling. Inside the pod is a connector block, and I was able to add the wires to appropriate slots on the block without crowding. Caution: the wiring is not heavy enough to support using the outlet for
You need to be logged in to see the rest of this content. Catalina380-IA members, please login.
To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.