Hull #: 20
The anchor locker provides no place to install a chain lock, which is required to keep the anchor locked on the roller underway. I made one up as follows: a short length of 3/16″ stainless wire (length depends on the length of your anchor stock) with a lifeline pelican hook (West Marine model #543132, which adjusts in length) swaged on one end, a stainless thimble nice-pressed on the other. A galvanized shackle attaches this to the bitter-end padeye in the anchor locker. The pelican hook goes through a chain link as close as possible to the anchor, and the adjustment on the hook allows this to be snug. The anchor is not going to fall overboard. This can also be used to snub the chain and allow you to transition the chain to the gypsy while raising the anchor if you do
You need to be logged in to see the rest of this content. Catalina380-IA members, please login.
To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.