Anchor Chain Specifications
Hull #: 20
The Maxwell windlass manual calls for using 5/16″ short -link chain. They have kindly clarified this, and recommend A.C.C.O. 5/16″ high test chain spliced to 5/8″ 3-strand or multi-plait nylon anchor line. If you want to use the windlass ability to handle both line and chain on the gypsy, a short, tapered splice is required on multi-plait and a full three-part splice (all three strands going through the chain link) is recommended for three-strand. You may get more information or order pre-spliced chain-rode combinations from Maxwell: 1610 Babcock St, Costa Mesa, CA 92627, phone 714-631-2634.
Please note that 5/16″ proof-coil chain, the kind most commonly available at boating stores, slips on the Maxwell gypsy and is VERY DANGEROUS to use. 5/16″ BBB chain fits the gypsy perfectly, but it is not as strong as the chain recommended by Maxwell.
You need to be logged in to see the rest of this content. Catalina380-IA members, please login.
To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.