Boom Vang Boom Attachment Problems
George Ciechanowski
9/1/1998
Hull #: 66

Something to keep an eye on is the screws that attach the boom vang to the boom.

The fitting on the end of the vang is secured with two screws and nyloninsert nuts. One of the nuts backed off and released the end of the fitting at the boom. The other screw was still in place but its’ nut was loose. Luckily I noticed the loose fitting before it did any major damage to itself or the boom.

Since the vang is in the way of tightening one of the screws I replaced both screws with hex head bolts, washers, and new nuts (you should not reuse nylon insert nuts, they loose their holding power). You gain access to the nuts by way of the inspection plate on the boom but to get to the forward screw to remove