I just finished installing A/C in my friend’s 380 (I already have it) and this is what I did:
Webasto 16k unit is mounted under the settee just fwd of the galley sink. This is about the only place a 12k or higher unit will fit. I used the existing thru-hull for the icebox pumpout as the intake, teed off the line just above the thru-hull and prior to the anti-siphon U mounted up behind the stove. The line off the tee goes under the galley floor transversely toward the bilge that is hidden under the screwed-down galley flooring. It then follows the bilge pump line fwd into the smaller accessible bilge adjacent to the settee. In that space I installed the water strainer so that if it ever needs to be opened/cleaned the water just spills into the bilge.
After the strainer it goes up through the liner floor
You need to be logged in to see the rest of this content. Catalina380-IA members, please login.
To join please fill out a membership application (Association->Membership Application) and send a check to the address on the form.