OK, I have successfully replaced my Transmission Cable. Here is the info for anyone interested. The final result is a very smooth shift…Sweet!

The cable length is 17 feet (I used a Teleflex, CCX63317). The toughest part of the whole project was getting the Cable holder out. I had to loosen the steering cables at the quadrant in order to shift the chain forward at the top of the binnacle to have enough room to pull the holder out. The left side of the binnacle has a little more room than the right side, so this is the side to use. The other trick was to totally flip the cable holder over to remove it,   Use the two cable like chopsticks as the Edison Tech told me, and flip it so that the bolt side was facing towards the middle of the binnacle (this will only make sense to those