Catalina Stripe Fix
Hal Breliant
11/5/2002
Hull #: 325

Purchase a piece of weather striping with an angled seal. This consists of a roughly 1″ piece of extruded aluminum, with a 3/4″ vinyl insert. [This is sold for door thresholds and usually comes in 30″ and 36″ lengths -ed].

The exact dimensions aren’t critical. I used a section about 10″ long under each of the deck drains. Mount each piece at the underside of the rub rail, tight to the deck/topsides lip. Seal it with silicone. [I suggest cleaning first with a solvent- ed]. I used two small screws to hold it in place while the silicone dries. The water runs off the strip into the bay instead of running back under the rubrail onto the hull. It works!

The photos [see photos 6, 7] show views looking up at the underside of the rub rail.

I just bought an